Ab Volvo Penta TAD1350GE

Built: 2012-2026 · Series: Other models

The photo shows the TAD881 VE from the same series. Source: https://produkter.koppommaskin.com/koppom-maskin/skogsmaskin

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The TAD1350GE comes from Ab Volvo Penta. Production: 2012-2026. The fuel is 300-500 ppm Low Sulfur Diesel. The rated output is 281 kW. The engine is turbocharged. The engine meets emissions stage Tier 3. Fuel reaches the combustion chamber through direct injection. The charge air is air-cooled. Charging is by a wastegate turbocharger. It is a four-stroke diesel engine. The cylinders are arranged in line. Rated output across the Ab Volvo Penta range ranges from 105 to 784 kW; the TAD1350GE sits in the lower part of that range with 281 kW. Its immediate neighbours are the TAD1182VE below it with 265 kW and the TAD1371 VE above it with 285 kW. 78 Ab Volvo Penta models are on record. The model is listed under Non-road diesel engines. 21 verified figures from 1 source are on file.

Technical data

Engine

Engine code3correct
Engine familyCVPXL12.8BCAcorrect
Fuel300-500 ppm Low Sulfur Dieselcorrect
Rated output281 kWcorrect
Power band225<=kW<450correct
Rated speed1,800 rpmcorrect
Maximum torque1,491 N·mcorrect
Speed at max. torque1,800 rpmcorrect
Cylinders6correct
Cylinder layoutin linecorrect
Bore131 mmcorrect
Stroke158 mmcorrect
Operating cyclefour-stroke dieselcorrect
Injectiondirect injectioncorrect
Aspirationturbochargedcorrect
Turbocharger typewastegate turbochargercorrect
Charge-air coolingaircorrect
Emissions stageTier 3correct

Origin and approval

Version3correct
Sales regionbothcorrect

Frequently asked questions

How much power does the Ab Volvo Penta TAD1350GE have?

The Ab Volvo Penta TAD1350GE delivers 281 kW.

When was the Ab Volvo Penta TAD1350GE built?

Production years: 2012-2026.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 21 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Diesel engine in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare