John Deere 568
Series: Rundballenpresse / Round baler
Technical data
Engine
| Engine model | Cat C9.3 (ATAAC)correct |
|---|---|
| Power | 237.9 kWcorrect |
| Cylinders | 6correct |
| Displacement | 9,299.7 cm³correct |
| PTO power required | 55.9 kWcorrect |
Dimensions and weights
| Length | 3,710 mmcorrect |
|---|---|
| Height | 2,790 mmcorrect |
| Unladen weight | 2,145 kgcorrect |
Working data
| Number of tines | 96correct |
|---|---|
| Twine rolls | 8correct |
| Number of knife bars | 4correct |
| Twine tying | electriccorrect |
| Number of belts | 8correct |
| Belt width | 180.3 mmcorrect |
| Max. bale weight | 1,089 kgcorrect |
Other data
| Ballengewicht min kg | 998 kgcorrect |
|---|---|
| Hubart | crankcorrect |
Where this model stands
Power-to-weight ratio: 110.9 kW/t (238 kW / 2.1 t)
Stronger than 100% of the grassland & forage in the register — out of 2 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the John Deere 568 have?
The John Deere 568 delivers 238 kW.
How much does the John Deere 568 weigh?
The unladen weight is 2,145 kg.
What engine does the John Deere 568 have?
6 cylinders, 9,300 cm³ displacement.
What are the dimensions of the John Deere 568?
3,710 mm × 2,790 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 18 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Round baler in 3D section
Turn the model, look inside and click an assembly — each one is explained.