Start › Vans › Mercedes Benz › SPRINTER 215 CDI-3,0/37

Mercedes Benz SPRINTER 215 CDI-3,0/37

Built: 2009-2009 · Series: Sprinter

Source: https://www.truck1.eu/leasing/buses/mercedes-benz/sprinter-3

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Mercedes Benz SPRINTER 215 CDI-3,0/37 is a machine built by Mercedes Benz. Production: 2009. The engine delivers 110 kW, has 4 cylinders, with a displacement of 2,140 cm³. The machine is 5,910 mm long and 1,990 mm wide. The unladen weight is 2,190 kg. The gross vehicle weight is 3,000 kg. Rated output across the Mercedes Benz range ranges from 17.7 to 2,140 kW; the SPRINTER 215 CDI-3,0/37 sits at the bottom of that range with 110 kW. Its immediate neighbours are the GELÄNDEWAGEN 300GD-460.3-KASTEN-4X4 below it with 108 kW and the 615 D above it with 111 kW. 6445 Mercedes Benz models across 57 series are on record. The model is listed under Vans. 8 verified figures from 1 source are on file.

Technical data

Engine

Power110 kWcorrect
Cylinders4correct
Displacement2,140 cm³correct

Dimensions and weights

Length5,910 mmcorrect
Width1,990 mmcorrect
Unladen weight2,190 kgcorrect
Gross vehicle weight3,000 kgcorrect

Where this model stands

Power-to-weight ratio: 50.2 kW/t (110 kW / 2.2 t)

Stronger than 75% of the vans in the register — out of 7,150 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Mercedes Benz SPRINTER 215 CDI-3,0/37 have?

The Mercedes Benz SPRINTER 215 CDI-3,0/37 delivers 110 kW.

How much does the Mercedes Benz SPRINTER 215 CDI-3,0/37 weigh?

The unladen weight is 2,190 kg.

What is the gross vehicle weight of the Mercedes Benz SPRINTER 215 CDI-3,0/37?

3,000 kg.

What engine does the Mercedes Benz SPRINTER 215 CDI-3,0/37 have?

4 cylinders, 2,140 cm³ displacement.

What are the dimensions of the Mercedes Benz SPRINTER 215 CDI-3,0/37?

5,910 mm × 1,990 mm.

When was the Mercedes Benz SPRINTER 215 CDI-3,0/37 built?

Production years: 2009.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

, 214 CDI KSV A1 FWD AUT

, 214 CDI KSV A2 FWD MAN

, 314 CDI CBS A2

, 314 CDI KSV A2 4X2 AUT

, 314 CDI KSV AS 4X2 AUT

, 316 CDI KSV A2 RWD AUT

, 316 CDI KSV A3 RWD AUT

, 316 CDI KSV A3 RWD MAN

, 316 DKA A3

, 516 CDI DKA 2ARWD MAN

, 516 CDI DKA A2 RWD MAN

, 516 CDI KASSEVOGN R2

Sources: [1] [2]

Van in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare