Technical register for agricultural, construction and commercial machinery · sourced data
Start › Vans › Mercedes Benz › 122cdi

Mercedes Benz 122cdi

Built: 2011-2011 · Series: Vans up to 3.5 t (Class N1)

More machines from model year 2011

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Mercedes Benz 122cdi belongs to the Transporter bis 3,5 t (Klasse N1) series. Production: 2011. The engine delivers 165 kW, has 6 cylinders, with a displacement of 2,987 cm³. The machine is 4,763 mm long and 1,906 mm wide. The unladen weight is 1,962 kg. The gross vehicle weight is 3,050 kg. The Transporter bis 3,5 t (Klasse N1) series covers 2023 models. Rated output within it ranges from 24 to 400 kW; the 122cdi sits in the lower part of that range with 165 kW. Its immediate neighbours are the 5D KOMBI-ML320-5-163154-4X4/282 below it with 160 kW and the C 300 CDI 4MATIC above it with 170 kW. Unladen weight within it ranges from 1,095 to 3,400 kg; here the 122cdi sits in the lower part of that range with 1,962 kg. 8330 Mercedes Benz models across 126 series are on record.

Sprinter and Vito — what the three-digit number says, what the W906 series code means and why EU class N1 up to 3.5 tonnes needs only a category B licence

On Mercedes vans the three-digit number is not a model name but a shorthand for two facts. The first digit gives the weight class, the following two the power class. A Sprinter 313 CDI produces 129 hp, a 316 CDI 156 hp — the number rises with engine output while the leading 3 holds the class.

Read on 4 more paragraphs

More important than the number for a used purchase, however, is the internal series code. W906 denotes the Sprinter generation from June 2006 to December 2019 — thirteen years under one code. W907 and W910 followed. Comparing two offers both called "Sprinter 313", look for the series code and the year, not the type number.

Within the W906 there was a technical break: from mid-2009 the four-cylinder diesels came with the OM 651 engine, coupled to a six-speed manual designed for commercial use. A 2008 vehicle and a 2012 one carry the same type designation and have different engines.

As EU class N1 vehicles up to 3.5 tonnes, the Sprinter and Vito need only a category B licence, no tachograph, and in most countries no distance-based lorry toll, which only applies to substantially heavier vehicles. Over the W906's thirteen years of production, emissions stages tightened from Euro 4 to Euro 6: early examples manage with an oxidation catalyst and particulate filter, while later Euro 6 versions additionally need SCR technology with AdBlue injection, whose tank, dosing module and NOx sensors are wear items of their own.

Entries in this class come largely from official registration data. Dimensions, weights and axle counts are reliable; equipment, body height and wheelbase of individual vehicles are not consistently recorded there and should be checked on the vehicle itself when buying.

Sources: Kennwerte der Modelle Mercedes-Benz Transporter (Klasse N1)

Technical data

Engine

Power165 kWcorrect
Cylinders6correct
Displacement2,987 cm³correct

Dimensions and weights

Length4,763 mmcorrect
Width1,906 mmcorrect
Unladen weight1,962 kgcorrect
Gross vehicle weight3,050 kgcorrect

Where this model stands

Power-to-weight ratio: 84.1 kW/t (165 kW / 2 t)

Stronger than 96% of the vans in the register — out of 7,144 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Mercedes Benz 122cdi have?

The Mercedes Benz 122cdi delivers 165 kW.

How much does the Mercedes Benz 122cdi weigh?

The unladen weight is 1,962 kg.

What is the gross vehicle weight of the Mercedes Benz 122cdi?

3,050 kg.

What engine does the Mercedes Benz 122cdi have?

6 cylinders, 2,987 cm³ displacement.

What are the dimensions of the Mercedes Benz 122cdi?

4,763 mm × 1,906 mm.

When was the Mercedes Benz 122cdi built?

Production years: 2011.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Van in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare