Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Mercedes Benz › SPRINTER › SPRINTER 515 CDI /43

Mercedes Benz SPRINTER 515 CDI /43

Built: 2009 · Series: SPRINTER

More machines from model year 2009

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The SPRINTER 515 CDI /43 from Mercedes Benz is part of the SPRINTER series. Production: 2009. The engine has 4 cylinders, with a displacement of 2,148 cm³. The vehicle is 2,230 mm wide. The unladen weight is 2,698 kg. The wheelbase measures 4,320 mm. The gross vehicle weight is 3,500 kg. The vehicle runs on 4 wheels. The SPRINTER series covers 336 models. Unladen weight within it ranges from 2,090 to 5,049 kg; the SPRINTER 515 CDI /43 sits in the lower part of that range with 2,698 kg. Its immediate neighbours are the Sprinter 316 CDI-9036-3.55T below it with 2,690 kg and the SPRINTER 315CDI-3,55/43 above it with 2,700 kg. Gross vehicle weight within it ranges from 3,500 to 7,490 kg; here the SPRINTER 515 CDI /43 sits at the bottom of that range with 3,500 kg. 8330 Mercedes Benz models across 126 series are on record.

Mercedes-Benz Sprinter – three generations since 1995 (T1N, NCV3, VS30): 309 to 519 CDI, model series 903/906/907 and the weight classes

The Sprinter replaced the T1 ('Bremen van') in 1995 and founded the class of 3.5 to 5 tonners with car-like comfort; in many markets its name became a generic term. Three generations appear in the register: T1N (model series 901–905, 1995–2006, in the register as e.g. '312D' or '903462'), NCV3 (series 906, 2006–2018, recognisable by codes such as '906133' or '906635') and VS30 (series 907/910, since 2018, for the first time also with front-wheel drive and as the eSprinter). The second generation was also the basis of the VW Crafter I.

Read on 3 more paragraphs

The type number follows a fixed pattern: the first digit gives the weight class (2 = up to 2.8/3.0 t, 3 = 3.5 t, 4 = 4.0 to 4.6 t, 5 = 5.0 t, recorded in registrations as 3.55, 3.88 or 4.20 t), the next two roughly the output in tens of hp – a 313 CDI has about 130, a 519 CDI about 190 hp. CDI stands for common-rail diesel, NGT for natural gas, 4x4 for all-wheel drive, KA or Kasten for the panel van, DoKa for the crew cab. In the register values run from 65 to 140 kW, 1,796 to 3,498 cm³ with four to six cylinders, 2,090 to 5,049 kg unladen, 3,500 to 7,490 kg gross and 5,240 to 9,900 mm long.

The span up to 7.49 t and almost ten metres explains why the Sprinter sits among the trucks in the register: chassis with box bodies, refrigerated boxes, minibuses and motorhomes use the 5 t class to the full.

On used examples, rust at doors, wheel arches and frame on the first two generations, injectors and EGR on the OM 651, and service records matching the mileage on courier vehicles are what count.

Sources: SpecCodex register, model data: Mercedes-Benz Sprinter (Zulassungsdaten), Mercedes-Benz Vans/Trucks (manufacturer), Mercedes-Benz Sprinter (Wikipedia)

Technical data

Engine

Cylinders4correct
Displacement2,148 cm³correct

Dimensions and weights

Width2,230 mmcorrect
Wheelbase4,320 mmcorrect
Unladen weight2,698 kgcorrect
Gross vehicle weight3,500 kgcorrect

Drivetrain and chassis

Wheels4correct

Frequently asked questions

How much does the Mercedes Benz SPRINTER 515 CDI /43 weigh?

The unladen weight is 2,698 kg.

What is the gross vehicle weight of the Mercedes Benz SPRINTER 515 CDI /43?

3,500 kg.

What engine does the Mercedes Benz SPRINTER 515 CDI /43 have?

4 cylinders, 2,148 cm³ displacement.

When was the Mercedes Benz SPRINTER 515 CDI /43 built?

Production years: 2009.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare