Technical register for agricultural, construction and commercial machinery · sourced data
Start › Vans › Mercedes Benz › SPRINTER, 317 CDI

Mercedes Benz SPRINTER, 317 CDI

Built: 2022 · Series: Sprinter

More machines from model year 2022

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The SPRINTER, 317 CDI from Mercedes Benz is part of the Sprinter series. Production: 2022. The engine has 4 cylinders, with a displacement of 1,950 cm³. The machine is 1,940 mm wide. The unladen weight is 2,640 kg. The wheelbase measures 4,330 mm. The gross vehicle weight is 3,500 kg. The machine runs on 4 wheels. The fuel is diesel. The Sprinter series covers 256 models. Unladen weight within it ranges from 1,840 to 3,325 kg; the SPRINTER, 317 CDI sits in the middle of that range with 2,640 kg. Its immediate neighbours are the SPRINTER, CDI CHASSIS LANG below it with 2,635 kg and the SPRINTER 214 CDI above it with 2,644 kg. Gross vehicle weight within it ranges from 2,695 to 3,550 kg; here the SPRINTER, 317 CDI sits at the top of that range with 3,500 kg. 8330 Mercedes Benz models across 126 series are on record.

Mercedes-Benz Sprinter as a van up to 3.5 tonnes – panel van, combi and crew cab in the light registration class: four- and six-cylinder CDI engines, 60 to 140 kW, rear-wheel and four-wheel drive

The Sprinter has been Mercedes-Benz's large panel van since 1995, and in this light registration class it covers vehicles up to 3.5 tonnes gross weight. The type designation follows a fixed factory logic: the first digit gives the weight class, the next two roughly the output in steps of ten horsepower – in this class the values run from 210 to around 320. KSV stands for panel van, DKA for crew cab, CHS for the chassis variant; RWD and 4X2 denote rear-wheel drive, AWD/4X4 four-wheel drive, AUT and MAN the automatic or manual gearbox.

Read on 3 more paragraphs

The register lists 256 versions with 60 to 140 kW output, displacements of 1,796 to 2,999 cm³ across 4 to 6 cylinders, unladen weights of 1,840 to 3,325 kg, gross weights of 2,695 to 3,550 kg and lengths of 5,200 to 7,750 mm at 1,900 to 2,600 mm width.

In this class the Sprinter competes with the Ford Transit, Volkswagen Crafter, Iveco Daily and Renault Master as a panel van for courier, trade and passenger work up to 3.5 t, for which an ordinary car licence suffices in many countries.

On used examples, check rust at the sliding-door rails and load-sill edge, condition of the turbocharger and injectors on the CDI engines, clutch wear on courier vehicles with frequent stop-starts, function of the tow hitch on combi versions, and whether the stated payload matches actual use.

Sources: SpecCodex register, model data: Mercedes-Benz Sprinter (Transporter-Zulassungsklasse), Mercedes-Benz Vans (manufacturer)

Technical data

Engine

Fueldieselcorrect
Cylinders4correct
Displacement1,950 cm³correct

Dimensions and weights

Width1,940 mmcorrect
Wheelbase4,330 mmcorrect
Unladen weight2,640 kgcorrect
Gross vehicle weight3,500 kgcorrect

Drivetrain and chassis

Wheels4correct

Origin and approval

VersionSPRINTER 317 CDIcorrect
Number of versions1correct
Built from2024correct
Built to2025correct
First registered from2,024correct
First registered to2,025correct

Frequently asked questions

How much does the Mercedes Benz SPRINTER, 317 CDI weigh?

The unladen weight is 2,640 kg.

What is the gross vehicle weight of the Mercedes Benz SPRINTER, 317 CDI?

3,500 kg.

What engine does the Mercedes Benz SPRINTER, 317 CDI have?

4 cylinders, 1,950 cm³ displacement, Diesel.

When was the Mercedes Benz SPRINTER, 317 CDI built?

Production years: 2022.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 19 individual figures for this model. They come from 4 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Used equipment offers
80 current listings for Mercedes Benz SPRINTER, 317 CDI on Hutnia.com.
View offers on Hutnia.com →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2] [3] [4]

Van in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare