Johnston Engineering 158B 101T
Built: 2003 · Series: Other models
More machines from model year 2003
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Johnston Engineering – other models: sweepers from Dorking outside the named ranges, from the 158B 101T to the 5000 S Road Super, four- and six-cylinder engines, 7,500 to 8,150 kg gross vehicle weight
Johnston Engineering builds street sweepers in Dorking, England. This page gathers the models the register could not assign to a named range: the 158B 101T, the 5000 S Road Super and the CX400.
Read on 3 more paragraphs
The register lists here 3 versions with engine displacement of around 3,922 cc and four to six cylinders. Kerb weight ranges from 5,050 to 5,440 kg, gross vehicle weight from 7,500 to 8,150 kg, length from 5,350 to 5,400 mm at a width of 1,650 to 1,680 mm.
The narrow spread in weight, length and width shows a fairly consistent vehicle size across this range's history for municipal road sweeping, where manoeuvrability in tight town centres matters as much as sufficient payload for the debris hopper. Sweepers like these typically run fixed routes in shift operation and see daily use with local authorities and road-maintenance firms.
On a used vehicle from this range, wear on the brushes, seals and suction system, and frame corrosion from moisture and road salt, are the key checks, along with the operating hours of the auxiliary engine and hydraulic pump where the sweeping system is driven separately. Chassis parts are available through the general commercial-vehicle trade, sweeping-technology components usually only through specialist municipal-equipment suppliers.
Sources: SpecCodex register, model data: Johnston Engineering (weitere Modelle)
Technical data
Engine
| Cylinders | 6correct |
|---|
Dimensions and weights
| Length | 5,350 mmcorrect |
|---|---|
| Width | 1,650 mmcorrect |
| Wheelbase | 2,350 mmcorrect |
| Unladen weight | 5,050 kgcorrect |
| Gross vehicle weight | 7,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Johnston Engineering 158B 101T weigh?
The unladen weight is 5,050 kg.
What is the gross vehicle weight of the Johnston Engineering 158B 101T?
7,500 kg.
What engine does the Johnston Engineering 158B 101T have?
6 cylinders.
What are the dimensions of the Johnston Engineering 158B 101T?
5,350 mm × 1,650 mm.
When was the Johnston Engineering 158B 101T built?
Production years: 2003.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.
