Iveco Cam 35 E 12
Built: 1999-1999 · Series: Other models
More machines from model year 1999
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Iveco/CAM – other models: a registry entry of light Iveco chassis in the 3.5-tonne class, 2,680 to 3,180 kg kerb weight, 2,500 cm³ four-cylinder engine, 1,980 to 2,200 mm width
This page gathers the Iveco vehicles listed under the CAM designation that the register could not assign to a named range. The type names 35 E 12 and S35/35-12 follow Iveco's light-commercial logic: the leading figure 35 denotes the 3.5-tonne weight class, confirmed here by a gross weight of 3,500 kg throughout; the additional number 814047 is a separate registry entry with no recognisable type logic.
Read on 3 more paragraphs
The register lists 3 versions here with kerb weights from 2,680 to 3,180 kg at a gross weight of 3,500 kg, four-cylinder engines of 2,500 cm³ and widths from 1,980 to 2,200 mm.
Chassis of this class have formed the basis for bodies from box vans to tippers and special vehicles for decades; the narrow margin between kerb weight and the 3.5-tonne limit makes them attractive to commercial keepers, since in most European countries they can be driven on an ordinary car licence. Across the European light-commercial segment, the 3.5-tonne class has for decades been the most heavily registered group, which is why numerous independent converters and importers run their own series on the same base vehicle.
On used vehicles of this class, check rust on the frame and wheel arches, the condition of the clutch and turbocharger, and – depending on the body – how the body's electrics connect to the chassis; drivetrain parts come through the independent parts network for Iveco commercial vehicles.
Technical data
Engine
| Cylinders | 4correct |
|---|
Dimensions and weights
| Width | 2,200 mmcorrect |
|---|---|
| Wheelbase | 3,950 mmcorrect |
| Unladen weight | 3,180 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Iveco Cam 35 E 12 weigh?
The unladen weight is 3,180 kg.
What is the gross vehicle weight of the Iveco Cam 35 E 12?
3,500 kg.
What engine does the Iveco Cam 35 E 12 have?
4 cylinders.
When was the Iveco Cam 35 E 12 built?
Production years: 1999.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.