Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › GMC › SIERRA › Sierra Classic 35

GMC Sierra Classic 35

Built: 1978 · Series: SIERRA

More machines from model year 1978

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The GMC Sierra Classic 35 belongs to the SIERRA series. Production: 1978. The engine delivers 157 kW, has 8 cylinders, with a displacement of 7,400 cm³. The vehicle is 6,270 mm long and 2,030 mm wide. The unladen weight is 2,494 kg. The wheelbase measures 3,350 mm. The gross vehicle weight is 3,500 kg. The vehicle runs on 4 wheels. The SIERRA series covers 63 models. Rated output within it ranges from 110 to 332 kW; the Sierra Classic 35 sits in the lower part of that range with 157 kW. Its immediate neighbours are the SIERRA PICK-UP 4X2/405 below it with 145 kW and the Sierra 2500 HD SLT above it with 185 kW. Unladen weight within it ranges from 2,165 to 3,775 kg; here the Sierra Classic 35 sits in the lower part of that range with 2,494 kg. 1090 GMC models across 32 series are on record.

GMC Sierra – Heavy Duty pickup of the 2500 and 3500 class: six- and eight-cylinder engines from 110 to 332 kW, 3.0 to 7.4-litre displacement, up to 6,150 kg gross weight

GMC has run the Sierra since 1987 as a standalone pickup model, technically related to the Chevrolet Silverado, and since 1999 as a fully separate range within General Motors; the Sierra family is built at, among other plants, Fort Wayne (Indiana), Flint (Michigan) and Silao (Mexico). The 1500, 2500 and 3500 numbers order payload class, the HD (Heavy Duty) suffix denotes the reinforced three-quarter- and one-ton versions with leaf-sprung rear axles, and trim levels such as SLE, SLT, AT4 and Denali range from work-focused to luxury specification.

Read on 3 more paragraphs

The register lists 63 versions with 110 to 332 kW from six- and eight-cylinder engines of 2,990 to 7,441 cm³, unladen weights of 2,095 to 3,810 kg, gross vehicle weights of 3,500 to 6,150 kg and widths of 1,950 to 2,490 mm.

In the Heavy Duty class the Sierra competes chiefly with the Ford F-250/F-350 and Ram 2500/3500 on towing and payload capacity; typical uses are construction and agriculture, horse and boat transport, and commercial fleets, where the Duramax turbodiesel paired with the Allison automatic is valued as a tow vehicle.

When buying used, check the injection pump, turbocharger and exhaust aftertreatment (DEF) on Duramax diesels, cylinder deactivation and oil consumption on the petrol V8s, frame corrosion at the rear leaf-spring mounts generally, and wear on the hitch ball and trailer wiring on frequently used tow vehicles; parts run through the GMC and GM parts network.

Sources: SpecCodex register, model data: GMC Sierra, GMC

Technical data

Engine

Power157 kWcorrect
Cylinders8correct
Displacement7,400 cm³correct

Dimensions and weights

Length6,270 mmcorrect
Width2,030 mmcorrect
Wheelbase3,350 mmcorrect
Unladen weight2,494 kgcorrect
Gross vehicle weight3,500 kgcorrect

Drivetrain and chassis

Wheels4correct

Where this model stands

Power-to-weight ratio: 63 kW/t (157 kW / 2.5 t)

Stronger than 19% of the trucks in the register — out of 25,241 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the GMC Sierra Classic 35 have?

The GMC Sierra Classic 35 delivers 157 kW.

How much does the GMC Sierra Classic 35 weigh?

The unladen weight is 2,494 kg.

What is the gross vehicle weight of the GMC Sierra Classic 35?

3,500 kg.

What engine does the GMC Sierra Classic 35 have?

8 cylinders, 7,400 cm³ displacement.

What are the dimensions of the GMC Sierra Classic 35?

6,270 mm × 2,030 mm.

When was the GMC Sierra Classic 35 built?

Production years: 1978.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 12 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare